Active Virus Shield AVS Uninstaller remover

Well, if you have a problem during the uninstallation of Active Virus Shield (for instance if you can't see the icon close to the clock to turn it off with right click) using his own uninstaller, because you receive a warning message that you must close AVS first, you simply have to open the Task Manager ( Ctrl+Shitf+ESC) and kill al avp.exe process that you can find, they may be 1, 2 for instance. then Click Retry and finish the uninstallation, no need from an external tool.

STOP: 0x0000006B - Process1_Initialization_Failed when running Windows : HARD DISK

STOP: 0x0000006B - Process1_Initialization_Failed when running Windows

STOP: 0x0000006b (0xC0000102, 0x00000002, 0x0000000, 0x00000000) 0x6B

If this occurs again, make sure that any new hardware or software is properly installed. On a new installation, check the vendor for updates.

You should disable any new hardware or software to see if these are the source of the problem.

NOTE: You may have to press F8 to start in Safe mode.

Disable any BIOS memory options like caching or shadowing.

NOTE: If you are using Roxio GoBack or GoBack from Norton SystemWorks, disable Goback.

NOTE: Disabling GoBack causes all historical GoBack-related information to be removed.

CAUSE

This behavior can occur if there is software installed on the computer that is incompatible with Windows XP.

RESOLUTION

To work around this issue, use one of the following methods.

Disable GoBack when Windows XP Setup Restarts Your Computer

To disable GoBack when Windows XP Setup restarts your computer:

1.	Press SPACEBAR to view the GoBack boot menu.
2.	Press D (to disable goBack), press Y (yes, to confirm), and then press ENTER twice.

miguelma.com.ar In this case the trouble was the HARD DISK. WD120GB

Agregar un disco de 80GB o mas a una PC con BIOS antiguo

En este caso un Disco Wester Digital de 80GB WD800BB IDE PATA agregado a una Mobo VXPRO con un micro Pentium 120 Bios Release date 1997

Se colocaron los jumpers en modo cap limit, ::;:; y se colocó en la configuración de la BIOS en en USER y se cargaron los valores de CHS para 8 GB luego se utilizó el data life guard para formatear luego se procedió a instalar windows 98 normalmente.
Finalizado esto, se removió el jumper del cap limit y en otro equipo se particionó y formateo los restantes 70 GB con Fat 32, luego se reconectó al equipo.

Windows messenger desinstalar uninstaller

Windows messenger desinstalar uninstaller

CÓDIGO

RunDll32 advpack.dll,LaunchINFSection %windir%\INF\msmsgs.inf,BLC.Remove